xboxscene.org forums

Author Topic: For Gods Sake Help Me  (Read 250 times)

. / / A

  • Archived User
  • Newbie
  • *
  • Posts: 48
For Gods Sake Help Me
« on: June 28, 2003, 11:50:00 PM »
ok i installed the mod chip, nothin to it (x-ecuter 2.2 pro)

i turn on the xbox (which switches should i have?)

it says
"Please insert CD with Bios update..."

i TRIED burning the ozxflash.iso as an image AND data ON BOTH cd-r's and cd-rw's
***no success***
it says
"CD-ROM Label: xxxxxxx
No Bios Update found... Halting!"

....very frustrating... what am i doing wrong?!?! ive sat here for 2 days installing the chip and gettin all freakin excited cuz nothin ever works when i try to do stuff like this so i was all happy and then this... some1

PLEASE HELP
Logged

feflicker

  • Archived User
  • Hero Member
  • *
  • Posts: 1692
For Gods Sake Help Me
« Reply #1 on: June 28, 2003, 11:53:00 PM »
beerchug.gif
Logged

. / / A

  • Archived User
  • Newbie
  • *
  • Posts: 48
For Gods Sake Help Me
« Reply #2 on: June 29, 2003, 12:01:00 AM »
i didnt hook up the equipment for flashing from my pc (true n00b style!!!)

i read in the forum that i had to put the bios.bin into an iso? with fluff? i dunno! me so confused help is still needed!
Logged

. / / A

  • Archived User
  • Newbie
  • *
  • Posts: 48
For Gods Sake Help Me
« Reply #3 on: June 29, 2003, 12:17:00 AM »
IM A FREAKIN GOD I FINALLY DID IT AFTER 2 DAYS THANX EVERY1 BUT I DONT NEED UR HELP
Logged

feflicker

  • Archived User
  • Hero Member
  • *
  • Posts: 1692
For Gods Sake Help Me
« Reply #4 on: June 29, 2003, 12:54:00 AM »
Can you atleast tell us what the problem was?

(for the bios.bin cd you just have to make a regular data cd...  is that what you finally did?)
Logged

smokeingit

  • Archived User
  • Hero Member
  • *
  • Posts: 588
For Gods Sake Help Me
« Reply #5 on: June 29, 2003, 01:01:00 AM »
HAHAAHAH as a modder myself if i would have seen this topic days ago i would have helped... the linux bios he has is a new one. which means it need only the bios file in the CD.
for chameleon its linuxbio.bin
i dont remember what it is for linux for the pros are. but you would put the bios name in the root of the CD. so only the bios is there.
Logged

GL64

  • Archived User
  • Newbie
  • *
  • Posts: 1
For Gods Sake Help Me
« Reply #6 on: June 30, 2003, 11:06:00 PM »
Ha. Finally I got this piece of shitzit to work. I could not use the CD to load up the bios since Cromwell bios never loaded after so many power on/off and reboots.

Here's the trick to loading the bios via LPT using X2MB. New version of X2 2.2 pro is lil diff. from X2.1 lite. When you flash the bios with x2 2.1 lite, you have to turn off all the dip switches and the chip will still have power and you can flash the bios via lpt using X2MB.

With X2 2.2 pro. You have to enable the chip, of course, to get power and turn On only one of the four dip switch. Does not matter which one you turn on, you must at least turn one switch on. Fill up all the banks in X2MB and write.....

Disconnect the lpt and leave the switches setting to the way it is, power off and boot with evox Boot CD. You will have your shitzit ready in no time.

That's all..........
Logged