Topic: Please Help Me Flash My D.6 Bios To 4976.02 (Read 49 times)

senator · « **on:** May 24, 2003, 06:58:00 PM »

There should be a section in the system settings...Flash Bios..If it's not there...You either are not running EVOX as a dash or it's not in the evox ini..

optikshell · « **Reply #1 on:** May 24, 2003, 07:07:00 PM »

please... i know its simple and someone knows... please help me guys...

chagoi · « **Reply #2 on:** May 26, 2003, 12:14:00 AM »

Try a program called FLASHX should work on most chips.
Just flash 2 banks,so you will not have to worry about bad flash.

gwarm · « **Reply #3 on:** May 28, 2003, 09:48:00 PM »

Warning this is from an extreme newbe but it worked for me.

1. FTP to the box and download the evox.ini file to your computer.
2. Open the evox.ini file and add the following item under the section system management

Item "Flash BIOS",@1

3. You should now see Flash bios when you select system managment
4. I dont understand this but make sure you see the following line where you see
Flash =

Flash = 0xbf61,"SST - 49LF020",0x40000

5. Copy the evox.ini file back to the xbox replacing the existing one.

Note: I had to put the chip back in mode 2 to make some games work.

elduderino1234 · « **Reply #4 on:** May 28, 2003, 09:56:00 PM »

QUOTE (chagoi @ May 26 2003, 08:14 AM)

Try a program called FLASHX should work on most chips.
Just flash 2 banks,so you will not have to worry about bad flash.

DONT USE FLASHX WITH A MATRIX! FlashX currently only supports x2 mods

Author Topic: Please Help Me Flash My D.6 Bios To 4976.02 (Read 49 times)