xboxscene.org forums

Author Topic: Raincoat Definition  (Read 42 times)

BongH2oBoy

  • Archived User
  • Newbie
  • *
  • Posts: 3
Raincoat Definition
« on: December 06, 2004, 08:53:00 PM »
I recently tried to do a TSOP mod on a refurbished Xbox. I bridged the two solder points on top of the motherboard. When I ran the 007 game exploit, I encountered this problem:

# ./raincoat -r backup.bin
raincoat Flasher 0.7 Feb 20 2004 by andy@
Reading raincoat.conf... 151 flash types re

UNKNOWN DEVICE manf=0x1F, dev=0x07
Try adding the device ID to raincoat.conf
#


I am using Raincoat 0.7 and seem to have no problems before.

Any ideas? Could M$ have done something to this refurb to prevent TSOP flashing?
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Raincoat Definition
« Reply #1 on: December 06, 2004, 08:59:00 PM »
no, its just a new brand of chip, i believe 1F is an Atmel

is this a 1.0-1.1 or 1.2-1.5? probably 1.2-1.5, if so, use this def in raincoat.conf

QUOTE
Flash = 0x1F07,"Damn Atmel POS",0x40000
Logged

JohnnyHunng

  • Archived User
  • Sr. Member
  • *
  • Posts: 312
Raincoat Definition
« Reply #2 on: December 06, 2004, 09:21:00 PM »
Dang lordvader, how is it that u know everything?
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Raincoat Definition
« Reply #3 on: December 06, 2004, 10:01:00 PM »
QUOTE (JohnnyHunng @ Dec 6 2004, 10:53 PM)
Dang lordvader, how is it that u know everything?

i make it my business to be omniscient
Logged

JohnnyHunng

  • Archived User
  • Sr. Member
  • *
  • Posts: 312
Raincoat Definition
« Reply #4 on: December 06, 2004, 10:49:00 PM »
$20 word alert!
Logged

ckh2004

  • Archived User
  • Full Member
  • *
  • Posts: 178
Raincoat Definition
« Reply #5 on: December 06, 2004, 11:56:00 PM »
QUOTE

i make it my business to be omniscient


Hi raincoat guru / lordvader129,

Slightly off topic...
I have SST 49LF020A based Aladdin XT which can't be flashed using raincoat 0.7. In evox, the flash ID is "dab0". However, I still couldn't flash using raincoat 0.7 even after adding / changing the following line in raincoat.conf:

Flash = 0xdab0,"SST 49LF020A",0x40000

I got the following message in raincoat:
INVALID MANUFACTURER ID: 0x09

I never had any problem flashing any SST 49LF020 based Aladdin chips using raincoat 0.7 before.

However, I had no problem flashing the new Aladdin XT with SST 49LF020A by using evox with the following lines added in evox.ini:

Flash = 0xbf61,"SST - 49LF020",0x40000
Flash = 0xbf52,"SST - 49LF020A",0x40000
Flash = 0xdab0,"SST - 49LF020A",0x40000

Any idea how to make raincoat 0.7 flash the damned SST 49LF020A?

Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Raincoat Definition
« Reply #6 on: December 07, 2004, 12:03:00 AM »
i think the xt has some new flash protect feature, having only used the chip once, and not having flashed it i couldnt tell you how to go about disabling it, check the alternative mods forums

you could do what i did, take the SST chip out of a modchip i had already flashed with the bios i want to use and put it in the aladdin, lol
Logged