Print

[_MegaX_]

I have been reading tuttorials, how to get my xenium modden xbox to a tsop flashed one....
First i had some problems to get my box flash enabled, then i noticed that when my mod was plugged on my motherboard, evox couldnt find my tsop, so everytime i tryed i got the msg " unkown flashtype" so i unplugged my mod,   then, evox (i used MA with EVOX) has found my st bios chip  , so i used the X2_4977_MultiVer256.bin bios from the slayers cd as i noticed that this bios works fine with my modchip, so, evox finds the bios file and starts flashing, everything went ok, the erase prosses, the flaching,...your xbox turns now off,...
So i tried to reboot my xbox, but no good,   he reboots 2 times, and then he shows a black screen and halt,
so i have tried to reboot my xbox with my chip first from an evox bios, then from my original bios(on the xenium) then hotswaped my chip(unplugged) but, now i recieve the message, unknown flachtype again, even with no modchip.
Conclusion without a modchip my xbox is useless.... <_<
so, if anyone has good advice, or a sollution,
i will appreciate that verry much!!!
Thanks and Greets _MegaX_

[Blank]

Why didn't you use some newer bios (Just curious)? You can fix this by using a 29-wire mod.