xboxscene.org forums

Author Topic: Tsop Flash With Evox And Chameleon  (Read 33 times)

loffler

  • Archived User
  • Newbie
  • *
  • Posts: 17
Tsop Flash With Evox And Chameleon
« on: April 27, 2004, 07:45:00 AM »

I know it is possible to flash the TSOP with just Evox and a Chameleon, but I cant find any details on the process. I can only find information on raincoat and 007.
I am guessing I still have to bridge the 2 write enable points, but what I am not sure of is:
What bios to use to boot evox.
What bios to use for TSOP.
Does the solder adaptor(pogo pins) still need the a15 point soldered?

I have a 1.0 xbox with Chameleon 1.3 currently running in mode 1 and bank 0 with X2 4981 bios.
My TSOP is currently corrupt and frags when chip removed or disabled.
Does a tutorial exist for this?
Thanks  <
Logged

venturahighway

  • Archived User
  • Sr. Member
  • *
  • Posts: 278
Tsop Flash With Evox And Chameleon
« Reply #1 on: April 29, 2004, 12:25:00 PM »

depending on what is on your tsop this may or may not work

you need to put "d6 tsop.bin" (from evox dashabord build 3921) on ONE bank of your chameleon
solder write enable points
get an evox disc in the drive
ground A15
ground D0

boot from d6 tsop on chameleon

about 1 second after power-on unconnect d0 from ground

it should boot the evox disc

unground A15 (very important)

flash tsop with a new bios like M7

This post has been edited by venturahighway: Apr 29 2004, 07:31 PM <
Logged

delacruz

  • Archived User
  • Jr. Member
  • *
  • Posts: 64
Logged