Print

[phatfigga03]

Hey I just tried the mech eurasia flash w/ the MECH ASSAULT hack, I transfered both the MA and the 007 files, I put the 4981.06_256k.bin in the e:\UDATA\4541000d\000000000000
and renamed it bios.bin
Now when I run linux through MA I get the blue screen but then Im stuck, when I go to system utils at the top it says flash eurasia (something like that) I cannot select it, I tried going into flash bios and cant do anything there either? So basically it seems like im 90% done its just the smallest part?

[bucko]

What version is your xbox? Have you soldered the TSOP points to enable access? What size is your bios image? Try reading the nfo's, instructions of the eurasia flash w/ the MECH ASSAULT, maybe it doesn't support your TSOP chip?  <

[venturahighway]

QUOTE (phatfigga03 @ Apr 25 2004, 03:30 AM)

Now when I run linux through MA I get the blue screen but then Im stuck

you mean when you run evox?

is there a file eurasia.xbe in
e:\UDATA\4541000d\000000000000 ?

This post has been edited by venturahighway: Apr 26 2004, 11:41 AM <

[phatfigga03]

My XBOX is the new HALO XBOX so its a version 1.4 and YES I soldered the TSOP points, my bios image was 256k. AND I have read EVERYTHING. I wouldnt be here if I didnt....And yes there is a file "eurasia.xbe" in that directory.

This post has been edited by phatfigga03: Apr 26 2004, 05:28 PM <

[venturahighway]

you should have this line in your evox.ini in the MA save dir:

CODE

Item "Flash with Eurasia","e:\UDATA\4541000d\000000000000\eurasia.xbe"

you must becase you see it in the menu, but you cannot select it.  if eurasia.xbe really exists at that path then there is something very unique about your box.    <

[phatfigga03]

I dont quite get what you really mean?
Yes I do have that in my evox.ini (Item "Flash with Eurasia","e:\UDATA\4541000d\000000000000\eurasia.xbe") thats taken directly from it. Now I dont quite get what you mean here: "you must becase you see it in the menu, but you cannot select it. if eurasia.xbe really exists at that path then there is something very unique about your box.

 <

[lordvader129]

if the link to eurasia is a different color and you cant select it that means the xbe isnt there, or the filename/directory is wrong, make sure the directory is extly right (12 0's) and that the xbe int eh directory is in the root of the 000000000000 folder and named eurasia.xbe  <

[phatfigga03]

yes it is all there just like you said I checked on the previous modded XBOX in filexplorer and the file is there and EXACLTY how you said it should be. The right directory and everything. Here is a list of everything that is in the MA folder:(in order)

000000000000(folder)
bios(folder
skin(folder)
bios.bin ( the evox 4981 file)
bios.bin.for.eurasia.goes.here.txt
default.xbe
eurasia.xbe
evox.ini
initrd.gz
items.txt
linuxboot.cfg
raincoat.cfg
readme.txt
savemeta.xbx
vmlinuz
xbsavegame.dat



I hope this helps any?
 <

[Pikkon]

Eurasia flash:
   For 007:AUF put 4541000d in e:\UDATA
   For Mech Assault put both in e:\UDATA
   put the bios.bin in e:\UDATA\4541000d\000000000000 (always)



You have to have both folders (4541000d)and(4d530017) for MA,if
you dont than you cant select Eurasia,I had the same problem as you,
I did this and it worked fine,flashed my xbox just fine.   <

[phatfigga03]

Yes I have put both folders in e:\udata

When you copy the game save from modded XBOX HDD to mem card your only supposed to have ONE file correct? The MECH ASSAULT?

Here is what all is in the 4d530017 folder:(in order)
62d648ebf155(folder)
bios(folder)
skin(folder)
default.xbe
evox.ini
items.txt
MAsave.sav
savemeta.xbx
xbsavegame.dat
titlemeta.xbx

I dont know what else to do this is really ****** me off..  <

[lordvader129]

you should have 2 files on the mem card, an MA save and a 007:auf save  <

[phatfigga03]

OK Im closer I re-read what lORDVADER and PIKKON just said I didnt have the AUF on there I didnt think it was supposed to be. I know I know Im retarded BUT now I got further this time cept for when it was "flashing" ya know atfer you see the penguin. It said flash attempt failed check flash log then ejected w/ orange light and started game again. And I know that the bios is in the right spot..  <

[Pikkon]

Check your solder points,thats the problem  <

[phatfigga03]

I just tried resoldering them and still the same thing I am 100% sure they are correct I dont want to put TOO much solder on there to make sure their intack..  <

[phatfigga03]

Nope DEF not the solder points I just soldered a wire b/w the two points and nothing, Sitll get "flashing original bios, flash failed check log for details"
There is something highlighted under that that I cannot see its off the TV but I can see there is something there? What might that be? I cannot selecet it either?  <