xboxscene.org forums

Author Topic: A Modders Worst Day  (Read 47 times)

generalnewbie

  • Archived User
  • Jr. Member
  • *
  • Posts: 64
A Modders Worst Day
« on: March 15, 2004, 02:35:00 PM »
So i read everything and attempted to solder the points on my 1.3 version xbox
i think everything is fine. i go to run it but it doesnt boot
it just flashes green 2x and then green red and orange colors
i even desolder the points hoping it would fix my problem
but it didnt i still get the light error.... without the solder
what are my options!!! any help asap would be nice

Any modders in the dallas area.. i would be happy if ya gave me some assistance

This post has been edited by generalnewbie: Mar 15 2004, 10:36 PM <
Logged

DvS

  • Archived User
  • Newbie
  • *
  • Posts: 25
A Modders Worst Day
« Reply #1 on: March 15, 2004, 02:58:00 PM »
There is almost no way unless you are real crappy at soldering that you can frag your xbox by soldering those 2 points, you must have however screwed up another area of your xbox while soldering the bridges. Im guessing you pulled off a trace or accidently overheated the board making something come loose.  <
Logged

Arakon

  • Archived User
  • Hero Member
  • *
  • Posts: 629
A Modders Worst Day
« Reply #2 on: March 15, 2004, 06:49:00 PM »
also possible: you took off a cap or resistor, or some solder dropped/spilled onto some components.
 <
Logged

generalnewbie

  • Archived User
  • Jr. Member
  • *
  • Posts: 64
A Modders Worst Day
« Reply #3 on: March 19, 2004, 03:10:00 PM »
i have no idea what i did.. but i did find extra solder.. on the board that dripped and i fixed that.. but it still wouldnt boot however i did go out and get a new box... and swapped the mobos on them and it seemed to fix the problem...
now... the game save i did isnt working after soldering the points

i think its because i burned the CD and copied the files from the CD to a modded xbox and then transfered the files instead of using the ethernet!
 <
Logged