xboxscene.org forums

Author Topic: V1.1 Sharp Tsop W/ Switch?  (Read 27 times)

KrayzieVanh

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
V1.1 Sharp Tsop W/ Switch?
« on: February 13, 2004, 06:00:00 PM »
Is it possible to add a switch to that version board? Since it is a Sharp chip and you have to connect those two points together....

 <
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
V1.1 Sharp Tsop W/ Switch?
« Reply #1 on: February 13, 2004, 06:10:00 PM »
yes, same planas any 1.0/1.1 TSOP, GND <-> a19 <-> 3.3v VCC  <
Logged

KrayzieVanh

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
V1.1 Sharp Tsop W/ Switch?
« Reply #2 on: February 14, 2004, 06:18:00 AM »
Damn... them SHARP chips are a pain in the ass. I ran into two of them too... oh well at least they were shipped with Samsung drive...

If anyone did not know also...

The bottom TSOP points I soldered and there was no video, when I hit the eject the box rebooted...

What I did was prewire all for points(TSOP and special SHARP chip points) after that I ran Raincoat... connected the TSOP wires togeter and the other two wires together... flashed perfectly.

I'll try adding a switch tomorrow on the other board.. wll let cha know ho it goes...  <
Logged