xboxscene.org forums

Author Topic: Raincoat V's Evox Flash  (Read 40 times)

top_man9

  • Archived User
  • Newbie
  • *
  • Posts: 9
Raincoat V's Evox Flash
« on: February 03, 2004, 04:57:00 AM »
which would be the savest/bestest way to flash?
using game save exploit  <
Logged

kaioshade

  • Archived User
  • Full Member
  • *
  • Posts: 247
Raincoat V's Evox Flash
« Reply #1 on: February 03, 2004, 05:04:00 AM »
I would advise using raincoat over Evox because it supports more chips with much less hassles.   <
Logged

jip1960

  • Archived User
  • Newbie
  • *
  • Posts: 6
Raincoat V's Evox Flash
« Reply #2 on: February 03, 2004, 05:34:00 AM »
It depends on what chip you have? If you have a winbond chip (1.4 or 1.5) you'll have to use raincoat, for all the others use evox.
The highway/Eurasia mechassault flash pack has both programs to cover all chips
and you also get video out when flashing a machine with a focus chip.
cheers jip


HIGHWAY/EURASIA MECHASSAULT FLASH PACK.

Evox Flash : 4d530017 folder

               For all Tsop's and cheapmod ( block erase ) V1.0-V1.5 ( except Winbond - which is chip erase ) but will still tell you if the pads are joined ok.   (Dont flash!!! - just check if evox recognises the winbond chip. If it tells you it is ok to flash, then go back to "Flash with Eurasia" and flash with that ) All others just flash as usual with the evox "flash bios" command.

Put the 4d530017 gamesave on to the xbox, and fire up with "MECHASSAULT'
               (X2 4979 256k bios, & 1meg bios) are installed in the bios folder .


Eurasia Flash: 4d530017 and 4541000d.  For Winbond ( "Beast Pack" in Australia,  V1.5 Focus video chip , you get video by running through evox first) then select Eurasia flash, and the "duck will do his job"

   
Put both gamesaves on to the Xbox, and fire up with "MECHASSAULT"
               (X2 4979 256k bios (bios.bin) is installed in the 007 folder for a ("duck-flash") Raincoat flash with video.
               
regards jip

thanks to:
HIGHWAY
robert
evox team
Bubbaal55 for concept
blueinfinity for testing

V1.1 rev by jip 28/01/04

Edited by jip 28/01/04.  <
Logged

Exobex

  • Archived User
  • Hero Member
  • *
  • Posts: 1093
Raincoat V's Evox Flash
« Reply #3 on: February 03, 2004, 06:39:00 AM »
QUOTE (top_man9 @ Feb 3 2004, 02:51 PM)
which would be the savest/bestest way to flash?
using game save exploit

The safest way is to use raincoat.  I've had EvolutionX freeze on me when flashing chips, luckily they were socketed LPC mods so I was able to hotswap the chip and reflash.  I don't fancy screwing up a TSOP using it, though, so it's raincoat every time for me.  <
Logged

lukano

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Raincoat V's Evox Flash
« Reply #4 on: February 03, 2004, 07:51:00 AM »
I agree, Raincoat is foolproof (or pretty much anyways)... do it that way.  <
Logged

liemer

  • Archived User
  • Newbie
  • *
  • Posts: 33
Raincoat V's Evox Flash
« Reply #5 on: February 03, 2004, 02:18:00 PM »
Raincoat is very good the eurasia is too much of a hassle to run a softmod so just use raincoat save file. :beer: cheers mate  <
Logged