xboxscene.org forums

Author Topic: Tsop Wont Flash  (Read 50 times)

scoot

  • Archived User
  • Newbie
  • *
  • Posts: 8
Tsop Wont Flash
« on: February 02, 2004, 08:14:00 PM »
ive tryed to flash with the mechassult evox and it says not writeable
ive checked both solder points with a meter and even did the third just to
be sure. i used eurasia and it didn't work. flash log says:

-[ 007 TSOP Flash Kit v1.0 alpha 6 started: Thu Nov 15 17:07:38 UTC 2001 ]-----

raincoat Flasher  0.5  [email protected]  (tsop version by [email protected])
Checking for raincoat.cfg...
Flash types read: 0

UNKNOWN DEVICE manf=0xAD, dev=0xB0
Try adding the device ID to raincoat.cfg

-[ 007 TSOP Flash Kit v1.0 alpha 6 started: Thu Nov 15 17:15:30 UTC 2001 ]-----

raincoat Flasher  0.5  [email protected]  (tsop version by [email protected])
Checking for raincoat.cfg...
Flash types read: 0

UNKNOWN DEVICE manf=0xAD, dev=0xB0
Try adding the device ID to raincoat.cfg

-[ 007 TSOP Flash Kit v1.0 alpha 6 started: Thu Nov 15 17:26:35 UTC 2001 ]-----

raincoat Flasher  0.5  [email protected]  (tsop version by [email protected])
Checking for raincoat.cfg...
0x01, 0xD5, 'AMD - Am29F080B', 00100000
0x04, 0xD5, 'FUJITSU - MBM29F080A', 00100000
0xAD, 0xD5, 'Hynix - HY29F080', 00100000
0x20, 0xF1, 'ST - M29F080A', 00100000
0xBF, 0x61, 'SST SST49LF020', 00040000
0x89, 0xA6, 'Sharp LHF08CH1', 00100000
0xDA, 0x8C, 'Winbond W49F020', 00040000
0x01, 0xA4, 'AMD - Am29F040B', 00080000
0xDA, 0x0B, 'Winbond - W49F002U', 00040000
0xC2, 0x36, 'MACRONIX - MX29F022NTPC', 00040000
0x20, 0xB0, 'ST M29f002BT', 00040000
0x01, 0xDA, 'AMD - Am29LV800B', 00100000
0x04, 0xA4, 'FUJITSU - MBM29F040C', 00080000
0xAD, 0xB0, 'Hynix - HY29F002TT-90', 00040000
Flash types read: 14

DETECTED: Hynix - HY29F002TT-90 (256K)
Programming with bios.bin...unable to open file

anybody know what that means?  <
Logged

neolithic

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Tsop Wont Flash
« Reply #1 on: February 02, 2004, 08:29:00 PM »
it sounds like your prob with raincoat is that your hynix chip isn't in your raincoat.cfg file.  There should be two hynix chips in your raincoat.cfg file.  That seems to be why evo-x won't flash it either. Make sure this:

Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0xadd5,"Hynix - HY29F080",0x100000

is either in your evo-x.ini file or your raincoat.cfg file and you should be good to go.  <
Logged

san9jay

  • Archived User
  • Newbie
  • *
  • Posts: 46
Tsop Wont Flash
« Reply #2 on: February 03, 2004, 02:12:00 AM »
actually based on the error reported it cannot find the bios.bin file. Ensure its the correct size and is available  <
Logged

kaioshade

  • Archived User
  • Full Member
  • *
  • Posts: 247
Tsop Wont Flash
« Reply #3 on: February 03, 2004, 05:05:00 AM »
I think its a bit of both. If it is saying 0 types read, then it isnt pulling any chip info from the cfg file. If it is saying cannot open file, then his bios might not be placed properly.  <
Logged

lukano

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Tsop Wont Flash
« Reply #4 on: February 03, 2004, 07:44:00 AM »
Make a subdirectory called /etc off of the raincoat directory, and put both the bios and the raincoat.conf in there, that will fix it... I promise.

ORRRR... if you've copied these onto your HD from a CD or DVD or CD/DVD-RW, make sure you "chmod 777 -R *" to remove the read only on them.

Also, try running "./raincoat -r backup.bin -v" to see if you can back up your existing TSOP to a backup.bin file....

This post has been edited by lukano: Feb 3 2004, 03:45 PM <
Logged

scoot

  • Archived User
  • Newbie
  • *
  • Posts: 8
Tsop Wont Flash
« Reply #5 on: February 03, 2004, 04:03:00 PM »
thanks guys
i was missing the flash line in the evox ini.  there were two evox in the flash pack and i guess i was ading the line to the one that wasnt runing fixed the second one and i flashed the first time.  <
Logged