xboxscene.org forums

Author Topic: Nomodchip Exploits  (Read 33 times)

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« on: January 26, 2004, 01:40:00 PM »
is there a no mod exploit that will work with my box it is 1.4 krl 5101 with a focus chip. not sure on my tsop chip? or do i have to buy a modchip?>  <
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Nomodchip Exploits
« Reply #1 on: January 26, 2004, 02:01:00 PM »
you can flash the TSOP, solder 2 sets of points on top of themotherboard and use evox M& or x2 4979 or higher  <
Logged

Blank

  • Archived User
  • Hero Member
  • *
  • Posts: 594
Nomodchip Exploits
« Reply #2 on: January 26, 2004, 02:02:00 PM »
What kind of exploit are you interested in? Something permament (Boots up to something else, instead of the ms dash) or something where you can choose when you want it to boot up to something else?

Did you check THESE forums?  <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #3 on: January 26, 2004, 02:34:00 PM »
yes but ive heard cant flashwinbond with evox and isnt raincoat 4 linux? i wanna play backups  <
Logged

neolithic

  • Archived User
  • Jr. Member
  • *
  • Posts: 75
Nomodchip Exploits
« Reply #4 on: January 26, 2004, 11:22:00 PM »
you can use raincoat to flash any bios you want (like X2), and still be able to play your backups.  <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #5 on: January 27, 2004, 01:57:00 PM »
is there a tut 4 incorporating raincoat in gamesavehack?  <
Logged

Blank

  • Archived User
  • Hero Member
  • *
  • Posts: 594
Nomodchip Exploits
« Reply #6 on: January 27, 2004, 02:58:00 PM »
There IS a 007 save w/ raincoat already installed. You should be able to find it on #xbins. :)  <
Logged

Blank

  • Archived User
  • Hero Member
  • *
  • Posts: 594
Nomodchip Exploits
« Reply #7 on: January 27, 2004, 03:00:00 PM »
*Double Post*

This post has been edited by Blank: Jan 27 2004, 11:00 PM <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #8 on: January 27, 2004, 04:28:00 PM »
<_< One more Question? using the gamesave with rain or eurasia do i select boot from med bios to incorporate or not?I know i need to flash a 256.any feedback on the best bios be appreciated. Btw tks everyone  :)   <
Logged

speedbump47

  • Archived User
  • Newbie
  • *
  • Posts: 44
Nomodchip Exploits
« Reply #9 on: January 27, 2004, 04:45:00 PM »
DO NOT use boot from media on a TSOP (or a modchip).  Those bioses are designed for use only from the hard drive.  Find a regular copy of X2 4981 or EvoX M7  <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #10 on: January 28, 2004, 02:26:00 AM »
but isnt that what i am trying to do? incorporate a bios to transfer to mem card then copy to hard drive that waythen?   <
Logged

Blank

  • Archived User
  • Hero Member
  • *
  • Posts: 594
Nomodchip Exploits
« Reply #11 on: January 28, 2004, 02:39:00 AM »
QUOTE (choad420 @ Jan 28 2004, 07:20 AM)
but isnt that what i am trying to do? incorporate a bios to transfer to mem card then copy to hard drive that waythen?

No, with the raincoat program, you are embedding it in there because you are planning on flashing your TSOP. That requires that your points are already soldered. If all you want to do is load new bios, try the Phoenix Bios Loader 1.3 and load some BFM bioses. :)  <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #12 on: January 28, 2004, 04:21:00 PM »
:( i dunno whats going on i did a highway pack with007 when i go to flash wit eurasia i get this=
DETECTED: Winbond W49F020 (256K)
Programming with bios.bin...unable to open file

-[ 007 TSOP Flash Kit v1.0 alpha 6 started: Thu Jan 29 ,000
0x20, 0xB0, 'ST M29f002BT', 00040000
0x01, 0xDA, 'AMD - Am29LV800B', 00100000
0x04, 0xA4, 'FUJITSU - MBM29F040C', 00080000
0xAD, 0xB0, 'Hynix - HY29F002TT-90', 00040000
Flash types read: 14

UNKNOWN DEVICE Read Only??? manf=0x09, dev=0x00
Try adding the device ID to raincoat.cfg

-[ 007 TSOP Flash Kit v1.0 alpha 6 started: Thu Jan 29 01:59:36 UTC 2004 ]-----

raincoat Flasher  0.5  [email protected]  (tsop version by [email protected])
Checking for raincoat.cfg...
0x01, 0xD5, 'AMD - Am29F080B', 00100000
0x04, 0xD5, 'FUJITSU - MBM29F080A', 00100000
0xAD, 0xD5, 'Hynix - HY29F080', 00100000
0x20, 0xF1, 'ST - M29F080A', 00100000
0xBF, 0x61, 'SST SST49LF020', 00040000
0x89, 0xA6, 'Sharp LHF08CH1', 00100000
0xDA, 0x8C, 'Winbond W49F020', 00040000
0x01, 0xA4, 'AMD - Am29F040B', 00080000
0xDA, 0x0B, 'Winbond - W49F002U', 00040000
0xC2, 0x36, 'MACRONIX - MX29F022NTPC', 00040000
0x20, 0xB0, 'ST M29f002BT', 00040000
0x01, 0xDA, 'AMD - Am29LV800B', 00100000
0x04, 0xA4, 'FUJITSU - MBM29F040C', 00080000
0xAD, 0xB0, 'Hynix - HY29F002TT-90', 00040000
Flash types read: 14

UNKNOWN DEVICE Read Only??? manf=0x09, dev=0x00
Try adding the device ID to raincoat.cfg
Is it my solder joints? and i thought evox would tell u if tsop solder bad?
 <
Logged

choad420

  • Archived User
  • Newbie
  • *
  • Posts: 16
Nomodchip Exploits
« Reply #13 on: January 28, 2004, 04:47:00 PM »
is updating to raincoat.501 my fix?  <
Logged

fluidmax

  • Archived User
  • Full Member
  • *
  • Posts: 113
Nomodchip Exploits
« Reply #14 on: January 28, 2004, 07:28:00 PM »
yes...it should solve ur problem  <
Logged