Topic: Flash Winbond Using Evox (Read 83 times)

ar_156 · « **on:** January 11, 2004, 04:39:00 AM »

There must be some way to flash Winbond through Evox.
If you find it please post it here.

Thanks <

wd-40 · « **Reply #1 on:** January 11, 2004, 11:53:00 AM »

I'm not sure on 1.0 & 1.1 but, it was mentioned earlier in one of the pinned articles that if you bridge the 2 points on top and the 1 on bottom, you can use evox to flash the bios.

I havn't actually done so, as I wouldn't want to use evo-x for quality purposes.

<

PsiDOC · « **Reply #2 on:** January 11, 2004, 11:57:00 AM »

The winbond only has the chip erase command, whereas EvoX only supports the Sector erase command. And hence will not suport the Winbond chip.
Use raincoat. it supports it.
<

DaShiZNiT · « **Reply #3 on:** January 11, 2004, 12:10:00 PM »

yup, thats why it says "trying to erase whole chip"

Listen to PSiDoc he knows whats up. <

ar_156 · « **Reply #4 on:** January 11, 2004, 04:48:00 PM »

Yes, I know Winbond chip can be flashed by Raincoat, not by Evox, by now...

I post this to invite those Evox genius guys to create some add-on to make it possible, Flash Winbond Chips by Evox, as it does with ST and other bios. <

ar_156 · « **Reply #5 on:** January 12, 2004, 03:10:00 PM »

Anything new? <

PsiDOC · « **Reply #6 on:** January 12, 2004, 11:56:00 PM »

Nope

lordvader129 · « **Reply #7 on:** January 13, 2004, 04:24:00 AM »

ive often wondered, is there some particular reason team evox cant add full chip erase to their flash code? <

doeboi · « **Reply #8 on:** January 13, 2004, 05:08:00 AM »

Hmm.....

My friend owns a v1.1 box with the 1meg TSOP, and he flashed using EvoX, after soldering the needed points and booting with audio exploit. hmm... As for me, I just got my XBOX recently and will probably flash the TSOP soon. Hope his method works for me. <

Troed · « **Reply #9 on:** January 13, 2004, 05:37:00 AM »

QUOTE (lordvader129 @ Jan 13 2004, 02:18 PM)

ive often wondered, is there some particular reason team evox cant add full chip erase to their flash code?

No.

There's also nothing stopping anyone from creating an embedded Linux that automatically starts raincoat with the right parameters and then call that from a menu entry in EvoX.
<

PsiDOC · « **Reply #10 on:** January 13, 2004, 07:04:00 AM »

SO true Troed.
After all with the existing (modded) bios in place even the 007 Hack can be called from the EvoX dash by linking to the .XBE.
Regards,
Psi <

iLLNESS · « **Reply #11 on:** January 13, 2004, 08:42:00 AM »

yeah raincoat will try to erase the sector... if it cant it does a full erase

evox only does sector erase.. and until evox supports it (theyre lazy for stuff like that) u wont be flashing your winbond

and maybe sharp too i cant remember <

lordvader129 · « **Reply #12 on:** January 13, 2004, 10:41:00 AM »

QUOTE (PsiDOC @ Jan 13 2004, 10:58 AM)

After all with the existing (modded) bios in place even the 007 Hack can be called from the EvoX dash by linking to the .XBE.

thats actually how i have my 007 save set up, load the save, it loads evox and form evox i can launch linux/raincoat if need be <

ar_156 · « **Reply #13 on:** January 13, 2004, 03:54:00 PM »

Yeah lordvader129
I linked Linux to Evox also, but is there any way to execute the raincoat flash from Evox without a PC connection? <

lordvader129 · « **Reply #14 on:** January 13, 2004, 04:14:00 PM »

yeah, if you launch the linux from evox the video output works, so you can type in the commands with a USB keyboard rather than telnetting <

Author Topic: Flash Winbond Using Evox (Read 83 times)