Topic: 1.5 And 1.3 Winbond W49f020t-90b (Read 163 times)

tflegend · « **Reply #15 on:** January 06, 2004, 03:44:00 AM »

I almost killed a 1.5 winbond.. it erased.. but gave a program error at 0% I tried again and it errored at 7% tried again and didnt detect tried again and detected but erase error tried again and 0% programming error.. this went on for like 30 minutes till I got like 30% and.. ERROR after another 30 minutes it finally got to 100%... man.. was I happy or what..

Exobex · « **Reply #16 on:** January 06, 2004, 09:19:00 AM »

QUOTE (insanim8er @ Dec 27 2003, 03:19 PM)

Edit your raincoat.conf file to look like this:

Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0xbf61,"SST - SST49LF020",0x40000
Flash = 0x20b0,"ST - 29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x89a6,"Sharp - LHF08CH1",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W49F020",0x40000
Flash = 0x0900,"Winbond - W49F020T",0x40000

then try to flash - or you can bridge all 3 sets of points on the MB - 2 sets on top 1 set on bottom, edit your evox.ini with that info and it should flash.

That last line...
Flash = 0x0900,"Winbond - W49F020T",0x40000

is wrong. VERY wrong. There is no such manufacturer as 0x09, this comes up BECAUSE YOUR SOLDERING IS FUCKED.

If you succeed in flashing whatever device is there (in other words your RD jumper is bad but your WR jumper is good), I feel sorry for you, because you've probably just reprogrammed your Xbox as a doorstop.

If you don't want to risk it, REMOVE THAT LINE!

Zedek · « **Reply #17 on:** January 06, 2004, 10:24:00 AM »

Tell em how it is Exobex..they don't listen to the rest of us

Exobex · « **Reply #18 on:** January 07, 2004, 07:21:00 AM »

QUOTE (Zedek @ Jan 6 2004, 07:24 PM)

Tell em how it is Exobex..they don't listen to the rest of us

kcgames · « **Reply #19 on:** January 07, 2004, 06:36:00 PM »

Thanks I had the same problem I'm getting raincoat as we speak... I wish someone would have told me a few days ago that evox wouldn't flash the newer systems.

Exobex · « **Reply #20 on:** January 12, 2004, 08:01:00 AM »

QUOTE (Geremia @ Jan 7 2004, 09:06 PM)

Nothing happens if 0x0900 is in evox.ini, simple the erase process fails because without #OE and #WE drived correctly, the flash understand only the read command.

Are you positive about this?

Would you be prepared to put your money where your mouth is, and try flashing a machine with the WE jumper soldered (therefore enabling write access to the chip) and the RD jumper DEsoldered (so raincoat can't identify it correctly), whilst keeping that line in your raincoat.conf?

'cos I wouldn't!

j8994 · « **Reply #21 on:** March 27, 2006, 10:30:00 PM »

I NEED THE FLASH CODES FOR ALL WINBOND CHIPS ,

PLEASE HELP

PS SORRY FOR CAPS KEYBOARD SCREWED NEED TO GET NEW ONE

lordvader129 · « **Reply #22 on:** March 28, 2006, 08:30:00 AM »

QUOTE(j8994 @ Mar 27 2006, 11:37 PM)

I NEED THE FLASH CODES FOR ALL WINBOND CHIPS ,

PLEASE HELP

PS SORRY FOR CAPS KEYBOARD SCREWED NEED TO GET NEW ONE

under pinned tutorials theres a list of TSOP flash definitons

dring219 · « **Reply #23 on:** September 18, 2006, 07:58:00 PM »

lordvader129 · « **Reply #24 on:** September 18, 2006, 10:27:00 PM »

QUOTE(dring219 @ Sep 18 2006, 10:05 PM)

bump

any particular reason?

wilcd · « **Reply #25 on:** December 27, 2003, 03:43:00 AM »

i've 2 xboxes ,, 1 is 1.3 (i suppose) and the another one is 1.5 with focus chipset,both have WINBOND W49F020T-90B flash , no way to flashthem ,, i've made the 2 bridges in bottom near the LPC ,one in R7D2 & R7D10,,no way ,,always i get erasing fail and no continues,include i've made the another one point under the motherboard and no way yet...i've used evox 007 and raincoat 007 ....anyone can help me??

king regards
asap

PSXCopyCat · « **Reply #26 on:** December 27, 2003, 06:00:00 AM »

raincoat 5.01 they flash fine

wilcd · « **Reply #27 on:** December 27, 2003, 06:30:00 AM »

i got it... 5.01 and rewrote the files but i continue receving the same error....

curiosly RAINCOAT identifies the flash as W49F020 and not as W49F020T-90B ...evox makes same result ,,,both freeze saying "Erasing....."

insanim8er · « **Reply #28 on:** December 27, 2003, 06:19:00 AM »

Edit your raincoat.conf file to look like this:

Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0xbf61,"SST - SST49LF020",0x40000
Flash = 0x20b0,"ST - 29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x89a6,"Sharp - LHF08CH1",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W49F020",0x40000
Flash = 0x0900,"Winbond - W49F020T",0x40000

then try to flash - or you can bridge all 3 sets of points on the MB - 2 sets on top 1 set on bottom, edit your evox.ini with that info and it should flash.

wilcd · « **Reply #29 on:** December 28, 2003, 03:32:00 AM »

raincoat continues saying "erasing error in 0x90..." , i've made all 3 points...

will try evox later but i think i won't be lucky

Author Topic: 1.5 And 1.3 Winbond W49f020t-90b (Read 163 times)