Print

[Heffy]

Can someone please help me out, i've been trying for a few days now to flah my TSOP on my 1.3. I'm using the phoenix bios loader atm, not sure exactly how that works, but it's working.  

I've joined all 3 points on the board with a conductive ink pen, i've also  used a multimeter to test if they are joined correctly and they are.

i've tried raincoat .3 .5 and .501 and i keep getting the same error.  man x00 device x09 Unkown device try adding blah to the .conf file.

It's a hynix HY29F002 and i've made sure that "Hynix - HY29F002",0x40000 i in the .conf file.

i also have tried using evox but it tells me x00 and x09"flash not writable" every time, at first it recognised it as a winbond chip which i found strange.

can anyone hellp me out here i am getting sick of not getting any where

[tflegend]

well I myself always solder the points, but might be using window defogger kit in the future, as for your points, a 1.3 needs 2 points not 3.. atleast Ive always used 2 (flashed 5 boxes of which 3 1.2/1.3 and 2 1.4/1.5 to be honest they ALL were winbonds so that might have been it


same error. man x00 device x09 Unkown device try adding blah to the .conf file.

basically means it cant recognise the chip, but you say you used a multimeter to check your points so.... I dont know what could be wrong, DO BEWARE if it doesnt recognise it in the 1st attempt and you try again and again till it recognises it DONT FLASH IT coz theres a high chance it will erase the chip but not re-programm it again, thats all I can help you with right now, sorry bro

BUMP << someone else might help ya