xboxscene.org forums

Author Topic: Problem With Xbox/switch  (Read 29 times)

Xman66

  • Archived User
  • Jr. Member
  • *
  • Posts: 57
Problem With Xbox/switch
« on: December 10, 2003, 01:16:00 PM »
hey yall,
i have a version 1.0 xbox. I have just installed a switch so i can duel boot of the xbox tsop. The switch is like this: gnd<A19>VCC . I made sure i put a19 in the center and gnd at 1 end and vcc at the other. Heres the problem. With the switch in 1 postition i can boot to the ms dash with that bios fine but when i turn off the xbox to boot to the other half of the ms bios (just to make sure everything is in order) i get an on, off, on, off, and then christmas lights. What should i do? I made sure i have no solder splashes on the mobo as i am an expert solderer. Please help. :uhh:

This post has been edited by Xman66: Dec 10 2003, 09:16 PM
Logged

Xman66

  • Archived User
  • Jr. Member
  • *
  • Posts: 57
Problem With Xbox/switch
« Reply #1 on: December 10, 2003, 02:04:00 PM »
n/m i just noticed my solder piont was wrong :beer:
Logged

lordvader129

  • Archived User
  • Hero Member
  • *
  • Posts: 5860
Problem With Xbox/switch
« Reply #2 on: December 10, 2003, 02:48:00 PM »
i was just gonna tell you your 3.3v VCC pont is probably wrong (or the ground, lol) but it sounds liek you caught it already
Logged