Topic: Flashing Tsop V1.4/1.5 (Read 35 times)

linda92841 · « **on:** November 30, 2003, 05:43:00 AM »

My name is linda and i want to flash my tsop..i have a version 1.4 xbox and i solder the points that was shown on xbox-scene.com (front and Back) but after doing it, it will not load my evox disk, therefore i cannot flash the tsop..I have tried the solder points with a v1.0 box and my evox disk loads up fine and i was able to flash my tsop, but for some reason, i cannot do it with the newer v1.4...Can someone tell me what i'm Doing wrong. If you can please just email me directly at [email protected]

icjonu · « **Reply #1 on:** November 30, 2003, 06:06:00 AM »

errr ... after you solder the points you then have to flash the tsop; it will not automatically load burned media. you must either use the 007Evox or 007 Raincoat to flash the bios now. mechassault is another option. after you have flashed your tsop then you can load evox from a burned media. make sure to flash it with a 256K EvoxM7 bios or X4979 bios.

i can mod it for ya if you want =]

Jonathan

[email]
icjonu at comcast dot net

lordvader129 · « **Reply #2 on:** November 30, 2003, 11:45:00 AM »

QUOTE (icjonu @ Nov 30 2003, 11:00 AM)

i can mod it for ya if you want =]

dude, knock it off, if you want business there are forums for that, make a thread in modchip installers or buy/sell

Linda: get a copy of 007 agent under fire or mechassault and a 007/MA evox gamesave, then you can load evox to flash your bios, although if its a 1.4 you may have winbond bioschip, which means youll need the 007 or MA with raincoat gamesave, feel free to email or IM me and i can walk you through the process

icjonu · « **Reply #3 on:** November 30, 2003, 04:58:00 PM »

Hey, lordvader, I did tell her how to do it didn't I?

and i mentioned the modding it for her part after i told her how to do it.

Author Topic: Flashing Tsop V1.4/1.5 (Read 35 times)