Topic: Tsop Flashing V1.5 (Read 82 times)

pyro88 · « **Reply #15 on:** November 14, 2003, 06:09:00 AM »

ya for 1.4 and 1.5 you have to use the evox m7 bios or it will frag.

NeoKast · « **Reply #16 on:** November 14, 2003, 08:34:00 AM »

The Eurasia flashing tool also works with the Winbond chip. It's easy to use, but works blind (meaning you use the LED indicator to know how the progress is going).

And I don't know if that foil and tape method is even remotely close to good enough.

cONEction · « **Reply #17 on:** November 14, 2003, 10:28:00 AM »

QUOTE (Makanic @ Nov 14 2003, 04:02 PM)

Used Evox/007 tsop Flash on Ver 1.2 1.3 1.4
With no problems

As long as the chip
"IS NOT" a Windbond w49F020T
Otherwise it dont work. YOu have To Use Raincoat!!

Using Raincoat/007 tsop Flash
Windbond w49F020T Bio Ver 5101
Ver 1.4 (l Think) Correct me if lm Wrong
Used Bio X2 4977

Flashed Sweet & works Fine

Tried to flash

Using Raincoat/007 tsop Flash
Windbond w49F020T Bio Ver 5530
Ver 1.5
Used Bio X2 4977

Blanked & Copyed Bios Said it was OK...
rebooted Xbox

Flashing Red Light of DEATH...
Dead Bios

Take 2 NEW Box, Crossed Fingers & toes

Using Raincoat/007 tsop Flash
Windbond w49F020T Bio Ver 5530
Ver 1.5
Used Bio's Evox M7ef

Blanked & Copyed Bios Said it was OK...
rebooted Xbox....Same

Flashing Red
Light of DEATH

Another Dead Bios

Anyone with any Idea's Is there Something different
with Ver1.5..

Ver 5530 Pal Unit

LOL

i dont know what you exactky did, but M7 works fine on 1.5 PAL, you sure the bios was good?

i have a dead xbox too cause of the new fucking focus chip.

flashed it with x2 4977

pyro88 · « **Reply #18 on:** November 14, 2003, 02:26:00 PM »

cant u just ground some special wires on the back??? and boot it with a modchip? thats what i heard

chuckfredgoose · « **Reply #19 on:** November 24, 2003, 03:36:00 PM »

Ok I have a v1.4 or v1.5, every time I try to run AUF007 raincoat hack from load mission within the game. It goes immediately ERROR 21 screen. I update Dashboard to 5659.

Tried agian. Still Same thing happens.

Can someone get me out of this mess?

gizmo · « **Reply #20 on:** November 26, 2003, 02:04:00 PM »

are you running the saved 007auf file from the hard drive , or the mem card...make sure you run it from the hard drive.....just copy the files over

Gianmarco · « **Reply #21 on:** November 27, 2003, 12:08:00 AM »

Hi all,

Sorry but I did not really understand the update thing with raincoat 0.501 ?

Can't I just update a v1.5 X-box with the original 007savewithraincoat + x2 4979.06 via telnet ?

Thx

Exobex · « **Reply #22 on:** November 27, 2003, 07:29:00 AM »

QUOTE (Gianmarco @ Nov 27 2003, 09:08 AM)

Hi all,

Sorry but I did not really understand the update thing with raincoat 0.501 ?

Can't I just update a v1.5 X-box with the original 007savewithraincoat + x2 4979.06 via telnet ?

Thx

No.
The original 007savewithraincoat contains raincoat 0.3. You need to replace the raincoat and raincoat.conf files with the 0.501 versions.

QUOTE

Anyone with any Idea's Is there Something different
with Ver1.5.. Ver 5530 Pal Unit

Nope, apart from my having to adjust the Philips drive to read DVD-R's

. The reflash went fine.

Make sure you're not using any stupid lines in your raincoat.conf file.

flash=0x0900,"Winbond W49F020",40000 is an example of a stupid line, because 0x0900 is not, and never ever has been, a Winbond chip. With this line you're asking for trouble.

Exobex · « **Reply #23 on:** November 28, 2003, 04:05:00 AM »

QUOTE (Gianmarco @ Nov 28 2003, 09:40 AM)

Ok thanks for your reply Exobex.

I just have one more question...can I use the 007raincoat on any Xbox v1.5 or is it better to use the 007withEvox if I don't have a Winbond chip ??

Thx

I don't trust EvolutionX to flash the TSOP, as I've had it freeze a few times before when flashing LPCmods.

I always use 007savewithraincoat, upgraded with raincoat 0.501 (and the corresponding .conf file). No problems yet, on any Xbox, even those new ones with the 5530 kernel!

Neo_Da_One · « **Reply #24 on:** November 30, 2003, 10:14:00 AM »

bios M7 new xbox but keeps giving this error even after resoldering it for the 4th time !!!

plz help !!!
plus i know the contact is made perfectly even soldered the one beneath... ne ideas exobex or the others ??

Gianmarco · « **Reply #25 on:** December 01, 2003, 08:05:00 AM »

Exobex · « **Reply #26 on:** December 01, 2003, 08:12:00 AM »

QUOTE (Neo_Da_One @ Nov 30 2003, 07:14 PM)

i get the manufacturer 0x09, device 0x00 error in raincoat its the new version .501

bios M7 new xbox but keeps giving this error even after resoldering it for the 4th time !!!

plz help !!!
plus i know the contact is made perfectly even soldered the one beneath... ne ideas exobex or the others ??

Desolder the one beneath, then test across it using a multimeter. If you get a short between the two jumper points it means that your top jumper (nearest the TSOP) is correctly soldered. Check the other one VERY carefully, this is the one that determines whether you get the 0x09, 0x00 or the proper device ID. If necessary solder a strand of wire across it, that helps if the solder refuses to bridge the gap.

Inni.nl · « **Reply #27 on:** December 02, 2003, 02:41:00 PM »

and even another 1.5,
but this one I bought last week just dont want to..
I have a very good zoom lens to check my soldering,
and soldered it several times..

Used the latest raincoat from the official site, the right bios,
Any SKILLED tsop'er please please help out..
I have the same problem as the post above..
Thank you

Inni
[email protected]

Author Topic: Tsop Flashing V1.5 (Read 82 times)